Sabtu, 14 Agustus 2010

Setting Modem

Informasi setting modem yang digunakan untuk layanan Telkom Speedy

ADSL Modem SMC













Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge:

* Klik WAN
* Clik ATM PVC
* Klik VCI
* Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
* Klik Save Settings
Setting PPPoE:

* Klik WAN
* Clik ATM PVC
* Klik VCI
* Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
* Klik Save Settings


ADSL Modem ZyXeL








P-660R
Default IP: 192.168.1.1
Default username: admin
Default password: 1234
Setting Bridge

* Pilih Network
* Pilih WAN
* Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
* Pilih Maintenance
* Pilih Tools
* Restart

Setting PPPoE

* Pilih Network
* Pilih WAN
* Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
* Klik Maintenance
* Klik Tools
* Restart



ADSL Modem Shiro




 









Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Advanced
* Klik WAN
* Klik New Connection
* Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
* Save Settings
* Restart Router

Setting PPPoE:

* Pilih Advanced
* Klik WAN
* Klik New Connection
* Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
* Save Settings
* Restart Router


ADSL Modem Aztech




 









Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge

* Klik Advanced
* Pilih WAN
* Klik New Connection
* Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
* Save Settings
* Restart

Setting PPPoE/Router:

* Klik Advanced
* Pilih WAN
* Klik New Connection
* Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
* Save Settings
* Restart


ADSL Modem TECOM





 









AR1031
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Advanced Setup
* Klik WAN
* Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Cheklist Enable Bridge Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot

Setting PPPoE:

* Klik Advanced Setup
* Klik WAN
* Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
* Cheklist Enable WAN Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot


ADSL Modem Prolink





 







  

 * Login To -> http:// 10.0.0.2
User Name: admin
Password: password
Klik . . . . OK
* Chose Configurasi WAN:
* Select Adapter: Pilih Pvc3 (Indonesia)
* Edit Field:
Bridge = Enable
Encapsulation = 1483 Bridge IP LLC
ATM VPI = 8
ATM VCI = 81
* Static IP Setting: � just blank �
IP Address = just empty
Subnet Mask = just empty
Gateway = just empty
User Name = username@telkom.com. . . . . . ( optional ) *
Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
* If you choose to put username & password there just double clik explorer
* If you not choose to put username & password there you have to create new connection at Network Connection
* Create New Connection (Bridge) See here..>>
* Than Next:
* * Klik Submit
* * Klik Save Configuration
* Next: Save Reboot ....


ADSL Modem D-Link
 










DSL-302T
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Setup
* Klik Connection
* Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
* Klik Tools
* Klik System Commands, Save All, Restart

Setting PPPoE/Router:

* Klik Setup
* Klik Connection
* Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
* Klik Tools
* Klik System Commands. Save All, Restart


ADSL Modem Repotec




 











* Buka Internet Explorer ketik: http://192.168.1.1
* Username: admin & Password: epicrouter
* Klik: OK
* Klik WAN
* Pic Adapter: Pvc0
* Klik Submit
* Virtual Circuit = Enabled
* Bridge & IGMP = Disable
* Each region was different from another region and for Bandung vpi:8 , vci: 81
* Service Category = UBR without PCR
* Protocol/Conection type = PPPoE
* Encapsulation = LLC/Snap-Bridging
* Put Username & Password from your provider
* Klik Submit.
* Klik Save Configuration (wait till Saving configuration done.)
* put DNS: 202.134.0.155 & 202.134.2.5


ADSL Modem Dareglobal




 










Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Advanced Setup
* Klik WAN
* Find VPI/VCI: 8/81, Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Cheklist Enable Bridge Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot

Setting PPPoE:

* Klik Advanced Setup
* Klik WAN
* Cari VPI/VCI: 8/81, Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
* Centang Enable WAN Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot


ADSL Modem TP-Link



 









Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Advanced Setup
* Klik WAN
* Find VPI/VCI: 8/81, Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Cheklist Enable Bridge Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot


Setting PPPoE:

* Klik Advanced Setup
* Klik WAN
* Find VPI/VCI: 8/81, Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
* Cheklist Enable WAN Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot


Setting Modem Articonet ACN-100R dan ACN-110

 









Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:
a. Start � Control Panel � Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:

* Klik Start, klik Setting,klik Control Panel,
* Klik Network and Dial Up Connections.
* Klik Make New Connection, klik Next,
* Klik Dial Up to the Internet
* Klik I want to setup my internet manually, klik Next
* Klik I connect through a phone line and a modem klik Next
* Pilih dan klik modem ADSL yang sesuai
* Isi username:15xxxxxxxxxx@telkom.net
* Password: xxxxxxxx
* Klik OK dan Lanjutkan sesuai perintah yang muncul
* Klik Finish

Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:

* Klik Start, klik Setting, klik Control Panel.
* Klik Network Connection
* Klik Create a New Connection, klik Next.
* Klik Connect to the Internet, klik Next
* Klik Setup my connection manually, klik Next
* Klik Connect Using Dial Up, klik Next
* Klik modem ADSL yang sesuai, klik Next
* Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
* Confirm password: xxxxxxxx
* kemudian beri tanda v pada pilihan "Add a shortcut to the desktop screen"
* Klik Finish


Sumber: telkomspeedy.com

Tidak ada komentar:

Poskan Komentar

Komentar Via Facebook

Esbiwan Multimedia : Electronic Service, Perancangan FM Transmitter, Computer Maintenance, Warnet. Alamat : Blok Cicadas RT 09/20 Kel Dangdeur Subang. Telp. (0260) 413809, 08179267319